Other Equipment
Meters
Elenco F-2850 Frequency Counter
Measures 10 Hz to 30GHz. Ghost voices
are below a Hz that we can hear. So now we have a meter to measure that
and let us know when something is talking that is below what we can hear.
KII Meter (2)
This is a sensitive EMF meter. We
believe that in the fact that it's so sensitive it will be easier to
communicate with ghosts using this tool.
CellSensor EMF Meter
Another EMF meter that has a sensor on
the end of it and will beep when the EMF goes up.
Mel Meter 8704R
This is the same as the Mel meter below
in that is lists EMF readings and Temp readings simultaneously. But it has
an infrared back light as well as a flash light.
Mel Meter 8704 (2)
This is the Mel -8704 meter. This is a great tool because it’s not only an EMF meter but also has a built in thermometer that measures ambient temperature (surrounding air temp, not surface temps). In addition it offers a “burst mode” that very quickly adjusts and reads changing or “on the move” EMF’s. It has a large, easy to read display that has an indiglo type backlight. This is a must have tool for any good investigator. Our primary use for the Mel meters is to detect high EMF levels and get base readings of the area were working in so that we can rule out any non-paranormal spikes.
Raytek Raynger ST20 Infrared Thermometer
Takes surface temperature, using an infrared beam.
Lights
Energizer Cap Lamp
This clips on to a hat and has 3
settings: Red LED, Spotlight LED and 3 LED. It pivots so you can point it
at something down in front of you. Very convenient and out of the way.
Energizer Head lamps (3)
These have three settings- 2 with white
LED's and one with Red LED.
UV Headlamps (2)
Trying out the UV light method of seeing
ghosts. Also makes it even easier to not blind each other and the cameras
in the face with these.
UV Flashlights (3)
The light that UV puts out is supposed
to make it easier to see ghosts. So we will try it.
ACR MS-2000(M)
Infrared Strobe
We try lots of different lighting techniques. This being one of them. When
you point a strobe light at a fan that's on, it seems to slow down the
blades enough so that you can see it. It has been pondered over that maybe
ghosts move faster than we can see, so if we use an infrared strobe..
we're hoping it can slow down the ghost enough for the cameras to see!
Mini-Maglite
Black Light (3)
4 foot- F40 T12 Fluorescent strip with blacklight bulbs. We use these in conjuction with the Van De Graaff Generator to allow us to better to see potential ghosts. They also aid in providing more light for our camcorders when we are walking around.
 
Cases
Vanguard Supreme 53 F Case
Waterproof, air tight, with 2 levels of foam. Also has wheels with a
handle to roll it. This is what we carry our DVR unit and DVR monitor in.
Vanguard Supreme 46 Case
Waterproof, Air Tight and 2 levels with
foam. This is what we carry our DVR cameras in.
Husky Aluminum Cases (4)
 
This is what we carry all our equipment
in to keep them safe! These are light weight and sturdy cases with foam
compartments on the bottom. Also comes with a nice pouch compartment on
top for the small things.
Misc.
LED Maxxima Motion Sensors (5)
These are great motions sensors! They
catch things up to 20 ft. away. and have an operating range of 110
degrees. They are LED so they last longer than incandescent lights. And
they have an On, Off and Motion setting. They are silent, they just light
up. We usually set these up any where we are setting up a camera or any
where we will see if the light goes off.
Compass
Our test with this is to see if the
ghost can make the needle on the compass spin.
Motorola Talkabout 2 way radios
(4)
 
Vivitek D535 Projector
Gateway Media Center Laptop (2)
Glow Stick Jar
This is really just another experiment to see if a ghost will be able to move the glow stick. This is something that creates less error on our part because the air in the room or people moving won't move the glow stick inside the jar. It hasn't worked yet but we are still in the trial and error process.
Van de Graaff Static Electricity Generator
The generator works by the rubbing or "frictional charge" of 2 different insulated materials together. The generator pushes negatively charged ions into the air and they will be attracted to all that is positively charged. When the positive and negative ions meet they produce a glow that can be seen under a blacklight. Our goal here is to create static electricity to help ghosts manifest better and make it easier for our cameras to catch a glimpse
|